Crack Injection

Available
Home

Injection Foam 22 oz. Dual Cartridge

C102D
€70.00
This two part urethane foam is a special low-viscosity formulation that flows readily to all parts of crack before reacting with moisture to expand. Once expanded the permanently flexible closed cell foam does not shrink, thus effectively filling even larger voids such as those around skimmers. Foam is inert when cured and thus safe to the environment....
 2
Available
Home

Injection Foam 22 oz. Dual Cartridge (Case of 6)

C102D6
€320.00
This two part urethane foam is a special low-viscosity formulation that flows readily to all parts of crack before reacting with moisture to expand. Once expanded the permanently flexible closed cell foam does not shrink, thus effectively filling even larger voids such as those around skimmers. Foam is inert when cured and thus safe to the environment....
Available
Home

Injection Foam 11 oz. Single Cartridge

C102S
€69.00
This two part urethane foam is a special low-viscosity formulation that flows readily to all parts of crack before reacting with moisture to expand. Once expanded the permanently flexible closed cell foam does not shrink, thus effectively filling even larger voids such as those around skimmers. Foam is inert when cured and thus safe to the environment....
 2
Available
Home

Injection Foam 11 oz. Single Cartridge (Case of 6)

C102S6
€285.00
This two part urethane foam is a special low-viscosity formulation that flows readily to all parts of crack before reacting with moisture to expand. Once expanded the permanently flexible closed cell foam does not shrink, thus effectively filling even larger voids such as those around skimmers. Foam is inert when cured and thus safe to the environment....
Available
Home

Injection Epoxy 22 oz. Dual Cartridge

C121D
€70.00
This special epoxy injects at a very low viscosity to reach all parts of crack. Best applied with "Jake" Dispensing Gun #CG300 or other dual cartridge dispenser.
Available
Home

Skimmer Port Adhesive .5 oz. Syringe

C455M
€22.00
Special fast setting adhesive for attaching injection ports to skimmer. Holds tight during injection but allows port to be removed with putty knife after injection.
Available
Home

Stair Foam 22 oz. Dual Cartridge

C601D
€70.00
Rigid foam for filling voids below fiberglass steps. Provides support that keeps these steps from flexing and cracking. Requires Jake Dispensing Gun #CG300 and mixer tubes #CAMA10.
 2
Available
Home

Stair Foam 22 oz. Dual Cartridge (Case of 6)

C601D6
€450.00
Rigid foam for filling voids below fiberglass steps. Provides support that keeps these steps from flexing and cracking. Requires Jake Dispensing Gun #CG300 and mixer tubes #CAMA10.
Available
Home

Peel-n-Seal Surface Epoxy 22 oz. (Dual Cartridge)

C322D
€70.00
This surface seal epoxy makes a slightly less aggressive bond to the pool shell so that it can be "peeled" off in one piece after injection eliminating the need for grinding.
 2
Available
Home

Peel-n-Seal Surface Epoxy 22 oz. (Dual...

C322D6
€475.00
This surface seal epoxy makes a slightly less aggressive bond to the pool shell so that it can be "peeled" off in one piece after injection eliminating the need for grinding.
Available
Home

Carbon Fiber Staple

CASTP
€18.00
The staples in this kit are the first commercially available crack control stitching system designed to transfer load away from repair materials.
Available
Home

Skimmer Injection Kit

CK100
€240.00
The Skimmer Injection Kit enables skimmers to be stabilized and sealed without an investment in special guns. The Universal Cartridge of Urethane Foam enables injections to be done with a standard caulk gun. Includes enough material for 2-3 skimmers.
Available
Home

Crack Repair Starter Kit

CK300
€750.00
Everything you need to get started with Low Pressure Crack and Skimmer Injection. Using the materials in this kit you should be able to seal up to 30 feet of cracks or 2-3 skimmers. (see Staple Kit below for cracks requiring structural reinforcement).
Available
Home

Stair Foam Kit

CK600
€240.00
Support hollow or cracked fiberglass steps by filling the void between the steps and the soil with this rigid foam. Foam expands 7 times its volume so each kit (of 3 tubes) is usually adequate for at least one riser.
Available
Home

Carbon Fiber Staple Kit (15 Staples)

CKS15
€265.00
Carbon fiber staples add value and strength to crack repairs by distributing load beyond the glue line. Low profile provides the same tensile strength as #4 rebar but requires less material be removed for staple bed, and will not rust. Use anytime future movement is anticipated. Staple Kit includes all materials required to install reinforcing staples....
Available
Home

Carbon Fiber Staple Kit (30 Staples)

CKS30
€650.00
The staples in this kit are the first commercially available crack control stitching system designed to transfer load away from repair materials. The staples are comprised of high tensile strength and modulus carbon fiber and the fibers are encapsulated in a thermal set resin and cured under pressure during the manufacturing process.
Available
Home

Jake Dispensing Gun

CG300
€190.00
This dispensing gun is the secret to low pressure crack injection. The "Jake" dispensing tool utilizes a unique trigger mechanism and compression spring that work together to deliver a constant 20-40 PSI of injection pressure even when the trigger is not actively being squeezed. The continuous flow of material created by the system facilitates complete...
Product added to wishlist
Product added to compare.